Hikvision DS-3E1552P-SI(O-STD) — 48-Port Gigabit Smart PoE Switch
17 Stück lieferbar in 10-20 Tagen
Tagesaktueller Lagerbestand. Zwischenverkauf vorbehalten.
Artikel-Nr.:
301802631
Kernnutzen
Der Hikvision DS-3E1552P-SI(O-STD) ist ein Smart-Managed 48-Port PoE-Switch, der zuverlässige Stromversorgung und Datenanbindung für bis zu 48 IP-Kameras oder Access Points bietet. 470 W PoE-Budget, Long-Range-Funktion und intelligentes Management machen ihn zur passenden Wahl für Video- und WLAN-Infrastrukturen in mittelgroßen bis großen Projekten.
Highlights
- 48 × Gigabit PoE-Ports (Power over Ethernet, IEEE 802.3af/at) - ein Kabel für Strom und Daten
- 470 W PoE-Gesamtbudget, max. 30 W pro Port - ausreichend für AT-Kameras und Access Points
- Long-Range bis 300 m auf Ports 1-48 (bei reduzierter Datenrate von 10 Mbit/s) für entfernte Kameras
- PoE-Watchdog erkennt und startet nicht reagierende Kameras automatisch neu
- 2 × Gigabit RJ45 + 2 × Gigabit SFP für Glasfaser-Backbone
- Smart-Managed: VLAN, QoS, SNMP, ACL, IPSG, Port-Isolation und Rate-Limiting
Technische Details
- Switching-Kapazität: 104 Gbps · Packet Forwarding Rate: 77,38 Mpps
- MAC-Adressentabelle: 16 K · Interner Cache: 12 Mbit
- Ports: 48 PoE (1-48), 2 RJ45 Uplink, 2 SFP (Gigabit)
- PoE-Standard: IEEE 802.3af/at · PoE-Budget: 470 W · Max. Port Power: 30 W
- Long-Range-Modus bis 300 m (kompatible Geräte, reduzierte Datenrate 10 Mbit/s)
- Management: Web-Interface, Hik-Partner Pro One-Click-Aktivierung, SNMP
- Sicherheit: ACL (bis 64 Einträge), IPSG, Port-Isolation, Surge-Protection 6 kV
- Gehäuse: Metall, Rackmount 19", 1 HE · Maße: 440 × 44 × 323,8 mm
- Betriebsdaten: 0 bis 45 C, Luftfeuchte 5%-95% (ohne Kondensation)
Einsatzbereiche
- Videoüberwachungsinfrastrukturen mit vielen PoE-Kameras
- WLAN-Backbones mit zahlreichen Access Points
- Netzwerke in Büro- oder Unternehmensumgebungen (Rackmontage)
- Projekte mit entfernten Kamerastandorten dank Long-Range-Funktion
Downloads
Eigenschaften "Hikvision DS-3E1552P-SI(O-STD) — 48-Port Gigabit Smart PoE Switch"
| ACL: | Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.; Support ACL application on ports... |
|---|---|
| Bauform: | Rackmount |
| Chemistry: | CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
| Dimension (W × H × D): | 440,00 mm × 44,00 mm × 323,80 mm (17.32'' × 1.73'' × 12.71'') |
| Farbe: | Weiß / White |
| Gerätetyp: | Netzwerk-Switch |
| Gross Weight: | 4,5 kg |
| HPP: | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate.; 2. Display the port bandwid... |
| IPSG: | IPSG can control the security of port access device. Support port, MAC, IP binding. Support 256 security entries. |
| Industriell: | Nein |
| Installation Mode: | Rack (equipped with mounting ears) |
| Internal Cache: | 12 Mbits |
| Long Range: | Ports 1 bis 48: bis zu 300 m. Long range performance may vary depend on camera model or cable condition. |
| MAC Address Table: | 16 K |
| Management: | Smart Managed |
| Max. Port Power: | 30 W |
| Max. Power Consumption: | 500 W |
| NDAA Konform: | Nein |
| Net Weight: | 4,35 kg |
| Operating Humidity: | 5% bis 95% (no condensation) |
| Operating Temperature: | 0 °C bis 45 °C |
| Packet Forwarding Rate: | 77.38 Mpps |
| Perpetual PoE: | Supported PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade. |
| PoE: | Ja |
| PoE-Anschlüsse Anzahl: | 48 |
| PoE-Leistungsbudget: | 470 W |
| PoE-Norm: | IEEE 802.3af,IEEE 802.3at |
| PoE-Ports 802.3af: | 48 |
| PoE-Ports 802.3af (Bereich): | 1-48 |
| PoE-Ports 802.3at: | 48 |
| PoE-Ports 802.3at (Bereich): | 1-48 |
| PoE Port: | PoE: Ports 1 bis 48 |
| PoE Power Budget: | 470 W |
| PoE Power Pin: | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Standard: | IEEE 802.3af,IEEE 802.3at |
| PoE Watchdog: | Ports 1 bis 48: auto detect and restart the cameras that do not respond. |
| Port-Anzahl: | 52 |
| Port-Geschwindigkeit: | Gigabit |
| Port Isolation: | Ports 1 bis 52: port isolation mode to improve network security; Ports in an isolation group cannot communicate with each other, but they can comm... |
| Port Rate-Limiting: | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. |
| Ports: | 48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port |
| Power Consumption in Idle: | 30 W |
| QoS: | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.; Support port-based priority configu... |
| Relative Humidity: | 5% bis 95% (no condensation) |
| Safety: | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Shell: | Metal material |
| Smart-Managed: | Ja |
| Storage temperature: | - 40 °C bis 85 °C |
| Stromversorgung: | 100 bis 240 V AC, 50/60 Hz, Max. 7,5 A |
| Surge Protection: | 6 KV |
| Switch-Typ: | Conventional |
| Switching Capacity: | 104 Gbps |
| System Maintenance: | Support device management via web.; Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.; Support Super IP, w... |
| VLAN: | VLAN is used for network scale planning and network health improvement.; Support 802.1Q.; Configurable VLAN ID from 1-4094.; Support Trunk, Access ... |
| Zielgruppe: | Projekt |